Semi truck driving on a California highway while its Clean Truck Check test runs automatically

Clean Truck Check · automatic testing

Automatic Clean Truck Check Testing

A CARB-approved telematics testing device runs your Clean Truck Check emissions test while the truck is on the road. No appointment, no downtime, and no missed deadline.

Approved by CARBTests while you driveNo downtime

What is Automatic Clean Truck Check Testing?

Clean Truck Check requires a passing emissions test on a fixed schedule. Traditionally that means booking a credentialed tester and taking the truck out of service each time. Automatic testing removes that step.

A telematics testing device, which CARB also calls a continuously connected device, stays plugged into the truck. In CARB's words, these are devices that can perform Clean Truck Check emissions tests while the vehicle operates normally. The test happens while the truck is working, and the result is sent in electronically.

Set it and forget it

Once installed, the truck stays on its testing schedule without anyone booking a test.

No operational downtime

Testing is performed while the truck is operating, so it never leaves its route.

Fewer missed deadlines

Tests are completed ahead of each due date instead of at the last minute.

Compact telematics testing device plugged into the diagnostic port under a truck dashboard
The device stays connected to the truck's diagnostic port.

How It Works

Three steps, and only the first one needs anyone to touch the truck.

  1. 1

    Plug it in

    The device connects to the diagnostic port in the cab. It takes a few minutes and needs no special tools.

  2. 2

    Drive as usual

    While the truck is working, the device reads the emissions data from the engine and runs the Clean Truck Check test.

  3. 3

    Stay compliant

    The result is submitted to CARB electronically. You see the status of every truck, and we watch the deadlines.

Fleet manager reviewing passed Clean Truck Check results for each truck on a laptop
See the testing status of every truck in one place.

Approved by CARB

Only devices that CARB has approved can be used for Clean Truck Check testing. The device we use is approved by the California Air Resources Board under a CARB Executive Order and appears on CARB's published list of telematics testing devices.

CARB-approved telematics testing device

Approved under a CARB Executive Order for Clean Truck Check (HD I/M) testing. You can read how CARB describes these devices on its Telematics Testing Devices page.

Sky Transport Solutions is also a CARB-credentialed tester, so the same team that sets up your automatic testing can handle in-person tests for any trucks that need them.

Which Trucks It Fits

Automatic testing works on trucks with on-board diagnostics, which generally means 2013 and newer diesel engines. The device supports all three connection types CARB lists for heavy-duty and medium-duty vehicles:

ProtocolConnectorCommonly found on
SAE J19399-pinCummins, Detroit Diesel, Navistar and Paccar engines
SAE J1979 (OBD II)16-pinFord, Hino, Isuzu and Volvo engines
SAE J1979-2 (OBDonUDS)16-pinNewer engines that use the updated OBD standard

Trucks without OBD, generally 2012 and older diesel engines, cannot be tested this way. They need an in-person smoke opacity test, which we also perform.

Manual Testing vs. Automatic Testing

Manual testAutomatic testing
SchedulingBook a tester before every deadlineNothing to book after installation
DowntimeTruck is parked for the testNone. The truck is tested while it works
Who is involvedDriver, dispatcher and tester each timeNo one. The device does it
DeadlinesEasy to miss when trucks are on the roadTests are completed ahead of each due date
Best forNon-OBD trucks and one-off testsOBD-equipped trucks that run regularly

Why It Matters Now

Most heavy-duty trucks in California currently need a passing test twice a year, and under CARB's rule OBD-equipped trucks are scheduled to move to four tests a year. For a fleet of 20 trucks, that is 80 tests to schedule every year, each with its own deadline.

Missing a deadline can lead to a DMV registration hold, citations, and trouble with brokers and shippers who check compliance. Automatic testing takes the scheduling out of the picture, so the number of required tests stops being a workload problem.

What We Handle for You

Compatibility check

We look at your trucks and engines and confirm which ones can test automatically.

Setup

We get the devices installed and activated, and link each one to the right truck.

Ongoing compliance

We watch your test status and deadlines, report your vehicles and handle the annual compliance fee.

Put your Clean Truck Check tests on autopilot

Tell us how many trucks you run and what engines they have. We confirm compatibility, send the devices, and walk you through getting set up. Have questions first? Call (800) 498-9820.

Frequently Asked Questions

What is a telematics testing device?

It is a small device that stays plugged into the truck's diagnostic port and can perform Clean Truck Check emissions tests while the vehicle operates normally. CARB also calls these continuously connected devices.

Is the device approved by CARB?

Yes. The device we use is approved by the California Air Resources Board for Clean Truck Check testing under a CARB Executive Order, and it appears on CARB's published list of telematics testing devices.

Do I still need to bring my truck in for a test?

Not for the periodic OBD test. Once the device is installed and active, it performs the test while the truck is in service and the result is submitted electronically.

Which trucks can use automatic testing?

Trucks with on-board diagnostics, which generally means 2013 and newer diesel engines. The device supports SAE J1939 (9-pin) and SAE J1979 and J1979-2 (16-pin) connections, so it covers the common heavy-duty and medium-duty engine makes. Older non-OBD trucks need an in-person opacity test instead.

How long does installation take?

The device plugs into the diagnostic port, so installation takes a few minutes per truck and needs no special tools.

What if a truck does not pass?

You are notified, and you have time to repair the truck before the deadline. Because the device is always connected, problems tend to show up earlier than they would with a test done once every few months.

How do I get started?

Fill out the order form with your company details and the trucks you want covered. There is a one-time fee per device, and you see the full invoice before you pay. If you have questions first, call us at (800) 498-9820.

Does automatic testing replace everything else in Clean Truck Check?

No. Each vehicle still needs to be reported in CARB's Clean Truck Check system and the annual compliance fee still has to be paid. We handle those for you as well.